Ported J head - Long head bolt crack - Quik on car fix - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Ported J head - Long head bolt crack - Quik on car fix

Print Thread

Ported J head - Long head bolt crack - Quik on car fix #1109865 11/09/11 12:01 AM 11/09/11 12:01 AM
Joined: Jan 2003 Posts: 3,103 Phila Pa S scatpacktom OP master
scatpacktom OP master S Joined: Jan 2003 Posts: 3,103 Phila Pa	I have a crack in the long headbolt hole so oil is getting pumped into number one cylinder. Anyone have a quick and dirty way to keep from sucking the pan dry through the intake port?

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: scatpacktom] #1109866 11/09/11 12:28 AM 11/09/11 12:28 AM
Joined: Feb 2004 Posts: 6,257 acworth / N. georgia - south e... cheapstreetdustr master
cheapstreetdustr master Joined: Feb 2004 Posts: 6,257 acworth / N. georgia - south e...	maybe drill the id of the bolt hole out a lil ..and get a piece of copper pipe with od same as id..and press it into the bolt hole. then re install new head bolt? or something similar/ to that effect. cheapst. 365" Iron J heads,,3480lbs best 1.39 60ft on SS springs.10.54,124 mph ...6.67 1/8th et.average 60fts 1.46 w/ small cam &.063 no2 pill tagged & insured [image][/image]

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: cheapstreetdustr] #1109867 11/09/11 01:25 AM 11/09/11 01:25 AM
Joined: Feb 2005 Posts: 20,179 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,179 PA.	http://www.ksmetals.com/retail.html K&S metals sold at ace hardware stores in Pa. My local store stocks the size that slides into the bold hole with a little bit of clearance. I apply JB weld to the tube and it works great. Don't forget that one bolt hole on each head supplies oil to the rocker gear and if it applies to the one you are tubing that issue will have to be addressed. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: pittsburghracer] #1109868 11/09/11 01:32 AM 11/09/11 01:32 AM
Joined: Feb 2005 Posts: 20,179 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,179 PA.	Don't forget to thoroughly clean the bolt hole with a piece of rag,thin screwdriver and some carb cleaner before driving the epoxied tube in the hole. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: pittsburghracer] #1109869 11/09/11 09:50 PM 11/09/11 09:50 PM
Joined: Jan 2003 Posts: 3,103 Phila Pa S scatpacktom OP master
scatpacktom OP master S Joined: Jan 2003 Posts: 3,103 Phila Pa	I found the tube from k+s John! That was a good tip. I hope I can get it together and Kick Some Tail. The tube measures .531 in case anybody else runs into this. My trouble is in the oil feed hole so I will put a couple of notches in the tube. Thanks for the heads up you bailed me out

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: scatpacktom] #1109870 11/09/11 10:43 PM 11/09/11 10:43 PM
Joined: Dec 2007 Posts: 12,587 Great Neck,LI,new york hemi-itis I Live Here
hemi-itis I Live Here Joined: Dec 2007 Posts: 12,587 Great Neck,LI,new york	Will you be ready for Sunday?? HEMI-ITIS has no cure. My condition is fully BLOWN!!

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: scatpacktom] #1109871 11/09/11 10:54 PM 11/09/11 10:54 PM
Joined: Feb 2005 Posts: 20,179 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,179 PA.	Quote: I found the tube from k+s John! That was a good tip. I hope I can get it together and Kick Some Tail. The tube measures .531 in case anybody else runs into this. My trouble is in the oil feed hole so I will put a couple of notches in the tube. Thanks for the heads up you bailed me out No problem. Glad I could help. Now go have some fun. I hope to get out myself this weekend. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: scatpacktom] #1109872 11/10/11 03:38 AM 11/10/11 03:38 AM
Joined: Feb 2004 Posts: 1,093 Long Beach, CA Mike Swann super stock
Mike Swann super stock Joined: Feb 2004 Posts: 1,093 Long Beach, CA	just put some silicone under the bolthead. 8.30's @3400 lbs

Re: Ported J head - Long head bolt crack - Quik on car fix [Re: Mike Swann] #1109873 11/10/11 03:51 AM 11/10/11 03:51 AM
Joined: Aug 2004 Posts: 2,128 sweden S sshemi top fuel
sshemi top fuel S Joined: Aug 2004 Posts: 2,128 sweden	Quote: just put some silicone under the bolthead. Or a washer and silicone

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1