|
Lunati voodoo 60303 and power brakes??
#1007187
06/05/11 03:45 PM
06/05/11 03:45 PM
|
Joined: Jan 2003
Posts: 1,633 Jacksonville, NC
RonP
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 1,633
Jacksonville, NC
|
Hey folks, just have to finish brake system and build engine/trans and I will finally have my satellite on the road. I have this cam and it will be a 440 based 493 with edlebrock heads about 10:1 compression. I want this to be a completly streetable car. I am putting power brakes back in the car as my dad removed the booster years ago because of an agressive cammed engine. So will this cam work with power brakes? specs: http://www.lunatipower.com/Product.aspx?id=1579&gid=287Thanks
Last edited by RonP; 06/05/11 03:46 PM.
|
|
|
Re: Lunati voodoo 60303 and power brakes??
[Re: goldmember]
#1007191
06/05/11 05:48 PM
06/05/11 05:48 PM
|
Joined: Jan 2003
Posts: 1,633 Jacksonville, NC
RonP
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 1,633
Jacksonville, NC
|
Quote:
You sure you want to put that tiny cam in 500ci build? Yes, it will work power brakes.
well the thing is I already have it. Was just going to run a 440 in it, but have since decided on a 500. The thing is I really want it to be streetable as in if I want to drive it 400 miles to PA on leave, i can. Just want it to sound good and look good.
I have some time and I guess I can look into unloading this one and moving up a couple steps.
|
|
|
Re: Lunati voodoo 60303 and power brakes??
[Re: RonP]
#1007192
06/05/11 11:25 PM
06/05/11 11:25 PM
|
Joined: Jan 2007
Posts: 7,664 IN
ahy
master
|
master
Joined: Jan 2007
Posts: 7,664
IN
|
Agree no problem on the PB. I'm running a [Email]243@.050[/Email] intake duration/108 CL cam and PB work. 13" idle vacuum and much higher on deceleration.
This is on a 496 with 10.2 CR.
Last edited by ahy; 06/05/11 11:25 PM.
|
|
|
|
|
|