Lunati voodoo 60303 and power brakes??

Hey folks, just have to finish brake system and build engine/trans and I will finally have my satellite on the road.

I have this cam and it will be a 440 based 493 with edlebrock heads about 10:1 compression. I want this to be a completly streetable car.

I am putting power brakes back in the car as my dad removed the booster years ago because of an agressive cammed engine.

So will this cam work with power brakes?

specs: http://www.lunatipower.com/Product.aspx?id=1579&gid=287
Thanks

They'll work fine, that's a pretty mild cam.

I figured it would but wanted some opinions as my other stuff is just a little more agressively cammed.

Thanks

You sure you want to put that tiny cam in 500ci build? Yes, it will work power brakes.

Quote:

---

You sure you want to put that tiny cam in 500ci build? Yes, it will work power brakes.

---

well the thing is I already have it. Was just going to run a 440 in it, but have since decided on a 500. The thing is I really want it to be streetable as in if I want to drive it 400 miles to PA on leave, i can. Just want it to sound good and look good.

I have some time and I guess I can look into unloading this one and moving up a couple steps.