|
Re: Advance / Retard Cam????
[Re: CUDAJAS]
#964955
04/08/11 10:33 AM
04/08/11 10:33 AM
|
Joined: Jun 2008
Posts: 3,916 usa
lewtot184
master
|
master
Joined: Jun 2008
Posts: 3,916
usa
|
Quote:
I have an Edelbrock adjustable timing chain on my 360, and the timing cover off...if I wanted to improve the lower end, woudl I advance or retard that cam.
The timing chain alows, 3 degree of adjustment either way.
Should I worry about the valve to piston clearance (I am running the stock dished pistons)? ![](/ubbthreads/images/graemlins/smilie_help.gif)
Here are my current specs:
74 Cuda with a 360, Eddy torker II intake, Eddy torker Plus cam, The specs are as follows: @050 Int dur. 222 , Ex dur. 234 Lift Int .447 Ex .450 Intake Centre line 107 Ex centerline 116. About 9:1 compression. Holley 750 vac secondary carb. Dizzy has been recurved, running 20 initial, 38 total all in before 3000.
727 with stock converter (I know -its on the list!) 8-3/4 with 3.22s
Thanks!
that cam already has 5 degrees advance ground into it. why advance it more? i'd change the intake to a dual plane.
|
|
|
|
|
|