Quote:

Quote:

I have found that the pin is just for glass tilt adjustment for a tighter fit to the door frame .




That's what my buddy is saying; that the pin pushes up to tilt the vent frame for a tighter fit to the door frame, but it can't do that unless there is something to give it upwards pressure right? without any sort of bushing, the vent frame is free to float on the pin with no upwards pressure.

I'm convinced that there was no such bushing, but without one, you are relying on the two upper bolts to hold the vent frame in position, correct?


Dave



There are 3 bolts that hold the vent frame in place.... the 2 9/16s bolts under the plastic caps and the allen head bolt under the tiny plug. The white foam insert is the correct way the factory did them.