Quote:

so run the rears straight from the master to the wheel cyls basically. and run the line for the fronts from the master cyl, then to the line lock, out of the line lock to the fronts? the car has 7.10x15 Moroso Frontrunners.

also, the master cylinder im looking at getting is 1 1/32" bore. that sound about right?



Rear of the master goes to the fronts... front of the
master goes to the rears... I think that master will
be too big... you will have a hard pedal with no
travel to it... might try about a 15/16 master