Quote:
will not go back to 800 unless you loosen idle screw and start over. However when I do same test with vac hose disconnected from dist, idle returns to 800ish. Idle does jump around 20 -30 turns on the digital Tach/timing light, it is new. several guys said look hard at my distributor
What did you mean 20-30 turns? What they said, open up the dist, take out the center clip/pry up the reluctor & see what you see w the plate/arm assy that's out of whack EDIT b 4 you open the dist pump up the can & see if it's hanging up (rare)/leaking (somewhat common)
Last edited by RapidRobert; 01/24/11 07:52 PM.
