Quote:

Quote:

Soooo ---what kind of pressure shuld I use with a gravity gun ????




Assuming a Conventional gun (not HVLP) I would experiementing with 40-50psi




Isn't Gravity considered HVLP?

I run a Devilbiss FinishLine 3 (obsolete now) I am by no means a painter, but when I sprayed my car with PPG (I jambed three cars with Metallic paint)...I had 22psi at the gun. Having a regulator on the gun at the inlet is imperative...if you have it a regulator at the compressor you don't know for sure the loss you can incur because of the length on the air hose.


Family owned 1969 Charger R/T DualQuad 440/727/GVO/3.55s