Quote:

Hard to beat Crower lifters marsh performance aka Moparts Connection-- board sponsor has them in stock--The Comps are JUNK


He's running my lifters, and they are far from junk.
Solid roller cams are very unforgiving and it can be the spring, lash or pushrod that will likely be the FIRST thing to rear it's ugly head.

Already talked with Galen and I'm fairly certain it's not the lifter that caused the problem. Instead of pointing fingers we talked and went over everything...GOOD CUSTOMER!!

I agree the pushrods should be .120 wall 3/8 or .085 wall 7/16 IMO but that's not what caused this to happen.
Might be time to change the lobes for more "street" driving this time around.
Brian

Brian Hafliger