Why did I bend a pushrod?

Print Thread

Re: Why did I bend a pushrod? [Re: galen] #849296 11/10/10 03:03 AM 11/10/10 03:03 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	Sorry to hear about that. That is one reason I decided to go flat tappet cam in my new eng as I drive it alot on the street. Ron

Entire Thread
Subject	Posted By	Posted
Why did I bend a pushrod?	galen	11/09/10 03:22 AM
Re: Why did I bend a pushrod?	Bad340fish	11/09/10 03:28 AM
Re: Why did I bend a pushrod?	602heavy	11/09/10 03:40 AM
Re: Why did I bend a pushrod?	Old School	11/09/10 04:01 PM
Re: Why did I bend a pushrod?	polyspheric	11/10/10 03:24 PM
Re: Why did I bend a pushrod?	B G Racing	11/10/10 05:37 PM
Re: Why did I bend a pushrod?	bwdst6	11/10/10 06:55 PM
Re: Why did I bend a pushrod?	polyspheric	11/10/10 07:21 PM
Re: Why did I bend a pushrod?	roadhazard	11/10/10 07:55 PM
Re: Why did I bend a pushrod?	Cab_Burge	11/09/10 05:49 PM
Re: Why did I bend a pushrod?	Dodgem	11/09/10 07:58 PM
Re: Why did I bend a pushrod?	galen	11/09/10 08:37 PM
Re: Why did I bend a pushrod?	CompWedgeEngines	11/09/10 09:57 PM
Re: Why did I bend a pushrod?	Cab_Burge	11/10/10 03:36 AM
Re: Why did I bend a pushrod?	WILD BILL	11/10/10 03:41 AM
Re: Why did I bend a pushrod?	Bob_Coomer	11/10/10 03:50 AM
Re: Why did I bend a pushrod?	galen	11/10/10 04:02 AM
Re: Why did I bend a pushrod?	383man	11/10/10 07:03 AM
Re: Why did I bend a pushrod?	Anonymous	11/10/10 01:53 PM
Re: Why did I bend a pushrod?	Bob_Coomer	11/10/10 06:34 PM
Re: Why did I bend a pushrod?	Brian Hafliger	11/10/10 07:46 PM
Re: Why did I bend a pushrod?	CompWedgeEngines	11/10/10 08:00 PM
Re: Why did I bend a pushrod?	galen	11/10/10 09:32 PM
Re: Why did I bend a pushrod?	polyspheric	11/10/10 10:38 PM
Re: Why did I bend a pushrod?	hemi-itis	11/12/10 01:52 AM
Re: Why did I bend a pushrod?	440Jim	11/10/10 10:56 PM
Re: Why did I bend a pushrod?	Brian Hafliger	11/11/10 03:38 AM
Re: Why did I bend a pushrod?	polyspheric	11/11/10 06:25 AM
Re: Why did I bend a pushrod?	Brian Hafliger	11/11/10 07:22 AM
Re: Why did I bend a pushrod?	polyspheric	11/11/10 05:51 PM
Re: Why did I bend a pushrod?	galen	11/10/10 03:59 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To