for starters i pulled the small screw that holes a little ground wire to the passenger side of dash, sanded the surface of the dash, cleaned the eyelet and the screw, used di-electrical grease, put it back in snug.

the 2 bolts along the bottom of dash frame i pulled, cleaned up with sandpaper, cleaned body surface and dash tabs, used the grease and tightened them both down.

Checked ground strap on engine, greased and tightened it on head and inner fender. and the battery-head on the front as well.

Unfortunetly, no change. Should I try ground wires or are there some other present grounds I should check?


My YouTube Channel, "Hoosier Garage"
https://www.youtube.com/HoosierGarage