Quote:

I can bolt it to the front lower hole. the problem is when you open the throttle the pump arm come up and interfers with the bolt righ away......



I have a SV-1 and the Jegs bracket, I removed the pump arm and cut it off (shortened it) about 1/2".
That way I can use the lowest bolt hole.
Very easy to do and it won't compromise the strenght of the pump arm one bit as that overhang is not needed on that side but on the other side of the carb it is.
I guess they made them the same lenght on both sides just to make production simpler (just one arm instead of having to make two)

Getting closer... <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />