Quote:
I have turned the key to the "ON" position and Its hot on both sides of the ballast,according to my test light.
It will be hot on both sides, but the voltage will not be the same. A meter will indicate that there is a difference of around 6 volts between the two points. The light should be dimmer on one side than on the other side. Unless you have calibrated eyeballs, the light cannot tell you the voltage.
Craig
2014 Ram 1500 Laramie, 73 Cuda
Previous mopars: 62 Valiant, 65 Fury III, 68 Fury III, 72 Satellite, 74 Satellite, 89 Acclaim, 98 Caravan, 2003 Durango
Only previous Non-Mopar: Schwinn Tornado
| 
