110 or 220 MIG welder, mainly for sheetmetal opinions?

Print Thread

Re: 110 or 220 MIG welder, mainly for sheetmetal opinions? [Re: toddd] #679736 04/25/10 02:51 PM 04/25/10 02:51 PM
Joined: Nov 2006 Posts: 6,005 Reno, Nevada NV69B7RR OP master
NV69B7RR OP master Joined: Nov 2006 Posts: 6,005 Reno, Nevada	Lincolns are 20% off at Lowes right now. I bought the 140. I had a 10% coupon too and got out the door at $400 even 72 Demon 340 71 Duster 340 Resto https://board.moparts.org/ubbthreads/show...part=1&vc=1

Entire Thread
Subject	Posted By	Posted
110 or 220 MIG welder, mainly for sheetmetal opinions?	NV69B7RR	04/25/10 01:44 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Dougsmopars	04/25/10 01:55 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	flatiron	04/25/10 02:19 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	tripleblackcuda	04/25/10 02:32 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	DaytonaTurbo	04/25/10 03:11 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Lefty	04/25/10 02:27 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	NITROUSN	04/25/10 03:25 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Scott Carl	04/25/10 04:06 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Pacnorthcuda	04/25/10 04:20 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Commando1	04/25/10 05:49 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	toddd	04/25/10 06:18 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	NV69B7RR	04/25/10 06:51 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Michael	04/25/10 07:28 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Fury Fan	04/25/10 07:39 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Dakota542	04/25/10 07:59 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Noblewk	04/25/10 08:12 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	DonnieLawson	04/25/10 10:07 PM

Hop To