110 or 220 MIG welder, mainly for sheetmetal opinions?

Print Thread

Re: 110 or 220 MIG welder, mainly for sheetmetal opinions? [Re: NV69B7RR] #679726 04/25/10 09:55 AM 04/25/10 09:55 AM
Joined: May 2005 Posts: 2,295 dark side of the moon D Dougsmopars top fuel
Dougsmopars top fuel D Joined: May 2005 Posts: 2,295 dark side of the moon	I have the lincoln 110 welder. Very nice unit. It will weld anything on a car. If you need to weld 1/4 inch plate i'd go bigger welder but for auto repair they work very well.

Entire Thread
Subject	Posted By	Posted
110 or 220 MIG welder, mainly for sheetmetal opinions?	NV69B7RR	04/25/10 01:44 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Dougsmopars	04/25/10 01:55 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	flatiron	04/25/10 02:19 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	tripleblackcuda	04/25/10 02:32 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	DaytonaTurbo	04/25/10 03:11 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Lefty	04/25/10 02:27 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	NITROUSN	04/25/10 03:25 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Scott Carl	04/25/10 04:06 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Pacnorthcuda	04/25/10 04:20 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Commando1	04/25/10 05:49 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	toddd	04/25/10 06:18 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	NV69B7RR	04/25/10 06:51 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Michael	04/25/10 07:28 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Fury Fan	04/25/10 07:39 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Dakota542	04/25/10 07:59 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	Noblewk	04/25/10 08:12 PM
Re: 110 or 220 MIG welder, mainly for sheetmetal opinions?	DonnieLawson	04/25/10 10:07 PM

Hop To