BB valve train set up question

Print Thread

Re: BB valve train set up question [Re: Mr.Yuck] #640730 03/15/10 11:42 AM 03/15/10 11:42 AM
Joined: Feb 2003 Posts: 21,318 Manitoba, Canada DaytonaTurbo Too Many Posts
DaytonaTurbo Too Many Posts Joined: Feb 2003 Posts: 21,318 Manitoba, Canada	I thought the rocker shims were made out of a bit softer material to help them conform to the shaft shape? Even if not, many people have run them without issue, but .060 would be a lot of shimming.

Entire Thread
Subject	Posted By	Posted
BB valve train set up question	The_Mean_Machine	03/15/10 10:42 AM
Re: BB valve train set up question	Mr.Yuck	03/15/10 11:09 AM
Re: BB valve train set up question	The_Mean_Machine	03/15/10 11:18 AM
Re: BB valve train set up question	Mr.Yuck	03/15/10 12:20 PM
Re: BB valve train set up question	DaytonaTurbo	03/15/10 03:42 PM
Re: BB valve train set up question	BELVEDERE67	03/15/10 03:48 PM
Re: BB valve train set up question	roadhazard	03/15/10 03:58 PM
Re: BB valve train set up question	RemCharger	03/15/10 06:44 PM
Re: BB valve train set up question	1_WILD_RT	03/15/10 06:48 PM
Re: BB valve train set up question	RapidRobert	03/15/10 07:34 PM
Re: BB valve train set up question	The_Mean_Machine	03/15/10 09:14 PM
Re: BB valve train set up question	RemCharger	03/15/10 09:21 PM
Re: BB valve train set up question	RemCharger	03/15/10 09:25 PM
Re: BB valve train set up question	moper	03/15/10 09:45 PM
Re: BB valve train set up question	roadhazard	03/15/10 10:17 PM
Re: BB valve train set up question	The_Mean_Machine	03/17/10 11:59 AM
Re: BB valve train set up question	The_Mean_Machine	03/17/10 11:57 AM
Re: BB valve train set up question	RapidRobert	03/15/10 09:35 PM
Re: BB valve train set up question	BSB67	03/15/10 10:57 PM
Re: BB valve train set up question	AndyF	03/17/10 03:07 PM
Re: BB valve train set up question	The_Mean_Machine	03/17/10 03:18 PM

Hop To