BB valve train set up question

Print Thread

Re: BB valve train set up question [Re: Mr.Yuck] #640728 03/15/10 07:18 AM 03/15/10 07:18 AM
Joined: Jan 2003 Posts: 2,325 L�ffingen, Germany The_Mean_Machine OP top fuel
The_Mean_Machine OP top fuel Joined: Jan 2003 Posts: 2,325 L�ffingen, Germany	Quote: not sure what's up with all that math but you can shim up your shafts. I had to do it on an old 383 I had that was decked and heads were milled. Any spped shop should have the shims you need. the shims available are just pieces of bend sheet metal with a constand material thickness. Such shims will leave a gap in the lowest point of the shaft saddle and I am afraid of loosing oil pressure were the rocker shafts are feed. Btw. Dimensions in the sketch are metric... MeanMachine Cars

Entire Thread
Subject	Posted By	Posted
BB valve train set up question	The_Mean_Machine	03/15/10 10:42 AM
Re: BB valve train set up question	Mr.Yuck	03/15/10 11:09 AM
Re: BB valve train set up question	The_Mean_Machine	03/15/10 11:18 AM
Re: BB valve train set up question	Mr.Yuck	03/15/10 12:20 PM
Re: BB valve train set up question	DaytonaTurbo	03/15/10 03:42 PM
Re: BB valve train set up question	BELVEDERE67	03/15/10 03:48 PM
Re: BB valve train set up question	roadhazard	03/15/10 03:58 PM
Re: BB valve train set up question	RemCharger	03/15/10 06:44 PM
Re: BB valve train set up question	1_WILD_RT	03/15/10 06:48 PM
Re: BB valve train set up question	RapidRobert	03/15/10 07:34 PM
Re: BB valve train set up question	The_Mean_Machine	03/15/10 09:14 PM
Re: BB valve train set up question	RemCharger	03/15/10 09:21 PM
Re: BB valve train set up question	RemCharger	03/15/10 09:25 PM
Re: BB valve train set up question	moper	03/15/10 09:45 PM
Re: BB valve train set up question	roadhazard	03/15/10 10:17 PM
Re: BB valve train set up question	The_Mean_Machine	03/17/10 11:59 AM
Re: BB valve train set up question	The_Mean_Machine	03/17/10 11:57 AM
Re: BB valve train set up question	RapidRobert	03/15/10 09:35 PM
Re: BB valve train set up question	BSB67	03/15/10 10:57 PM
Re: BB valve train set up question	AndyF	03/17/10 03:07 PM
Re: BB valve train set up question	The_Mean_Machine	03/17/10 03:18 PM

Hop To