.960 or 1.00 torsion bars, any diffrence in handeling?

Print Thread

Re: .960 or 1.00 torsion bars, any diffrence in handeling? [Re: jrlegacy23] #617943 05/19/10 08:38 AM 05/19/10 08:38 AM
Joined: Oct 2005 Posts: 797 arizona, usa L lokalik super stock
lokalik super stock L Joined: Oct 2005 Posts: 797 arizona, usa	hey guys great post. glad my wife didn't read this one. understeer and oversteer was brought up, can someone explain just what that is and the cause and effect. i think i have an idea of what it is, probably worng though. thanks

Entire Thread
Subject	Posted By	Posted
.960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/19/10 06:34 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	autoxcuda	02/19/10 06:45 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/19/10 06:51 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Lefty	02/19/10 07:06 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	coronet1966d	02/19/10 07:15 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/19/10 08:21 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	AndyF	02/20/10 12:03 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jcc	02/20/10 01:20 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Skeptic	02/20/10 02:00 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jrlegacy23	02/20/10 03:01 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	MoparMarq	02/20/10 05:25 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/20/10 03:09 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	ledft79	02/20/10 05:34 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	mkdart	02/20/10 08:24 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Andrewh	02/20/10 08:45 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	moparrulzzz	02/21/10 10:44 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/22/10 10:42 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	autoxcuda	02/22/10 11:44 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/22/10 02:03 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	roadrunninMark	02/22/10 02:50 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	nd65	02/23/10 01:07 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Anonymous	02/22/10 02:54 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/23/10 01:07 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	roadrunninMark	02/23/10 04:50 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/23/10 10:09 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	HerboldRacing	02/23/10 10:46 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Wedgeman	02/23/10 11:35 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jcc	02/24/10 12:57 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/24/10 01:30 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/24/10 06:08 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jrlegacy23	05/19/10 01:30 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	lokalik	05/19/10 12:38 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	cudazappa	05/19/10 03:23 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Anonymous	02/24/10 03:01 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To