.960 or 1.00 torsion bars, any diffrence in handeling?

Print Thread

Re: .960 or 1.00 torsion bars, any diffrence in handeling? [Re: HerboldRacing] #617938 02/23/10 08:57 PM 02/23/10 08:57 PM
Joined: Dec 2003 Posts: 22,732 Bitopia J jcc If you can't dazzle em with diamonds..
jcc If you can't dazzle em with diamonds.. J Joined: Dec 2003 Posts: 22,732 Bitopia	Quote: My wife says she can feel the difference between 0.96" and 1.00" diameter. Too bad you've only got a .84" bar Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.

Entire Thread
Subject	Posted By	Posted
.960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/19/10 06:34 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	autoxcuda	02/19/10 06:45 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/19/10 06:51 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Lefty	02/19/10 07:06 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	coronet1966d	02/19/10 07:15 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/19/10 08:21 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	AndyF	02/20/10 12:03 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jcc	02/20/10 01:20 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Skeptic	02/20/10 02:00 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jrlegacy23	02/20/10 03:01 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	MoparMarq	02/20/10 05:25 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/20/10 03:09 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	ledft79	02/20/10 05:34 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	mkdart	02/20/10 08:24 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Andrewh	02/20/10 08:45 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	moparrulzzz	02/21/10 10:44 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/22/10 10:42 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	autoxcuda	02/22/10 11:44 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/22/10 02:03 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	roadrunninMark	02/22/10 02:50 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	nd65	02/23/10 01:07 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Anonymous	02/22/10 02:54 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/23/10 01:07 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	roadrunninMark	02/23/10 04:50 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/23/10 10:09 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	HerboldRacing	02/23/10 10:46 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Wedgeman	02/23/10 11:35 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jcc	02/24/10 12:57 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Roppa440	02/24/10 01:30 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	migsBIG	02/24/10 06:08 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	jrlegacy23	05/19/10 01:30 AM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	lokalik	05/19/10 12:38 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	cudazappa	05/19/10 03:23 PM
Re: .960 or 1.00 torsion bars, any diffrence in handeling?	Anonymous	02/24/10 03:01 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To