What is the largest LSA you ever saw on a Solid roller

Print Thread

Re: What is the largest LSA you ever saw on a Mech roll [Re: mbogina] #548927 12/09/09 11:22 AM 12/09/09 11:22 AM
Joined: Nov 2007 Posts: 406 Oregon,USA R RAT PATROL mopar
RAT PATROL mopar R Joined: Nov 2007 Posts: 406 Oregon,USA	I'm not sure what it all means either, but I did try advancing my cam 4 and the results were 60'=same, MPH=slowed 2.5, ET= slowed .2 The big Hemi didn't like it at all so I put it back where it was 298 duration 108 LSA @ 111 centerline. 5656667-MyPictures001.jpg (94 downloads)

Entire Thread
Subject	Posted By	Posted
What is the largest LSA you ever saw on a Solid roller	turbobitt	12/08/09 05:51 PM
Re: What is the largest LSA you ever saw on a Mech roller	Bob_Coomer	12/08/09 05:57 PM
Re: What is the largest LSA you ever saw on a Mech roller	aarcuda	12/08/09 06:02 PM
Re: What is the largest LSA you ever saw on a Mech roller	Cab_Burge	12/08/09 06:10 PM
Re: What is the largest LSA you ever saw on a Mech roll	blowndart	12/08/09 06:16 PM
Re: What is the largest LSA you ever saw on a Mech roll	mbogina	12/08/09 06:50 PM
Re: What is the largest LSA you ever saw on a Mech roll	moderncylinder	12/08/09 07:07 PM
Re: What is the largest LSA you ever saw on a Mech roll	602heavy	12/09/09 03:24 AM
Re: What is the largest LSA you ever saw on a Mech roll	turbobitt	12/08/09 07:19 PM
Re: What is the largest LSA you ever saw on a Mech roll	mbogina	12/08/09 08:04 PM
Re: What is the largest LSA you ever saw on a Mech roll	mr_340	12/08/09 10:18 PM
Re: What is the largest LSA you ever saw on a Mech roll	Locomotion	12/08/09 11:54 PM
Re: What is the largest LSA you ever saw on a Mech roll	S/ST 3040	12/09/09 01:11 AM
Re: What is the largest LSA you ever saw on a Mech roll	Leon441	12/09/09 01:12 AM
Re: What is the largest LSA you ever saw on a Mech roll	Dos Snails	12/09/09 01:41 AM
Re: What is the largest LSA you ever saw on a Mech roll	FlyFish	12/09/09 06:35 PM
Re: What is the largest LSA you ever saw on a Mech roll	S/ST 3040	12/09/09 06:39 PM
Re: What is the largest LSA you ever saw on a Mech roll	mr_340	12/09/09 06:57 PM
Re: What is the largest LSA you ever saw on a Mech roll	FlyFish	12/09/09 07:03 PM
Re: What is the largest LSA you ever saw on a Mech roll	Sport440	12/09/09 04:31 AM
Re: What is the largest LSA you ever saw on a Mech roll	602heavy	12/09/09 11:47 AM
Re: What is the largest LSA you ever saw on a Mech roll	mbogina	12/09/09 01:36 PM
Re: What is the largest LSA you ever saw on a Mech roll	S/ST 3040	12/09/09 01:57 PM
Re: What is the largest LSA you ever saw on a Mech roll	mbogina	12/09/09 02:11 PM
Re: What is the largest LSA you ever saw on a Mech roll	S/ST 3040	12/09/09 02:17 PM
Re: What is the largest LSA you ever saw on a Mech roll	RAT PATROL	12/09/09 03:22 PM
Re: What is the largest LSA you ever saw on a Mech roll	moderncylinder	12/09/09 04:10 PM
Re: What is the largest LSA you ever saw on a Mech roll	turbobitt	12/09/09 04:55 PM
Re: What is the largest LSA you ever saw on a Mech roll	joshking440	12/09/09 06:22 PM
Re: What is the largest LSA you ever saw on a Mech roll	602heavy	12/09/09 08:02 PM
Re: What is the largest LSA you ever saw on a Mech roll	mbogina	12/09/09 09:05 PM
Re: What is the largest LSA you ever saw on a Mech roll	maximum entropy	12/09/09 04:01 PM
Re: What is the largest LSA you ever saw on a Mech roll	Mills	12/09/09 09:21 PM
Re: What is the largest LSA you ever saw on a Mech roll	Sport440	12/09/09 10:23 PM
Re: What is the largest LSA you ever saw on a Mech roll	moderncylinder	12/09/09 10:50 PM
Re: What is the largest LSA you ever saw on a Mech roll	mr_340	12/09/09 11:48 PM
Re: What is the largest LSA you ever saw on a Mech roll	602heavy	12/09/09 10:54 PM
Re: What is the largest LSA you ever saw on a Mech roll	602heavy	12/10/09 12:09 AM
Re: What is the largest LSA you ever saw on a Mech roll	mr_340	12/10/09 12:44 AM
Re: What is the largest LSA you ever saw on a Mech roll	S/ST 3040	12/10/09 12:49 AM
Re: What is the largest LSA you ever saw on a Mech roll	Chris'sBarracuda	12/10/09 01:13 AM
Re: What is the largest LSA you ever saw on a Mech roller	sshemi	12/08/09 06:46 PM
Re: What is the largest LSA you ever saw on a Mech roller	rtstreet	12/08/09 06:11 PM
Re: What is the largest LSA you ever saw on a Mech roller	AndyF	12/08/09 06:37 PM
Re: What is the largest LSA you ever saw on a Mech roller	Tig	12/09/09 07:25 PM
Re: What is the largest LSA you ever saw on a Mech roller	polyspheric	12/10/09 06:04 PM
Re: What is the largest LSA you ever saw on a Mech roll	DakFink	12/11/09 07:27 AM
Re: What is the largest LSA you ever saw on a Mech roll	DakFink	12/11/09 08:57 AM
Re: What is the largest LSA you ever saw on a Mech roll	Sport440	12/11/09 11:18 PM
Re: What is the largest LSA you ever saw on a Mech roll	602heavy	12/12/09 12:28 AM
Re: What is the largest LSA you ever saw on a Mech roll	Sport440	12/12/09 12:56 AM
Re: What is the largest LSA you ever saw on a Mech roll	DakFink	12/12/09 01:53 PM
Re: What is the largest LSA you ever saw on a Mech roll	turbobitt	12/13/09 04:55 AM
Re: What is the largest LSA you ever saw on a Mech roll	Sport440	12/13/09 06:08 AM
Re: What is the largest LSA you ever saw on a Mech roll	turbobitt	12/13/09 01:49 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To