The car is an R/T, B5 blue, white longitudinal stripe, black top, 383HP, A/C power stearing, manual drums, automatic.
I know I've seen people bracing these things all over but looking at it, the only place that needed bracing was the trunk pan rear cross member to roof frame while on the rotisserie. I did that until it was time to put the pan in and then just supported the car on stands and everything stayed put. I even had it on the rotisserie with the floor pans out and doors hung with no bracing. No matter which way I spun it on the rotisserie, it didn't flex at all and the doors still opened and closed smoothly.
Probably not the best place to try my luck but it all worked out fine.