I want to do a budget 360 stroker and get around 500 hp if possible on pump gas. I know i need a 4" crank, what are decent rod's and what length? Will a 318 cam fit a 360 block and is a .528 solid a good choice? Any clearance issues with the block and a stroker assy? I also have 2.02 J-heads and adj rockers, i know they aren't the best choice but i gotta use them. I have a single plane weiand accelerator intake, 750 holley mech secondary carb, and MSD distributor from my 318, will the dist fit a 360? Sorry for all the questions, any help would be appreciated.