I found this online. I don`t know if it really works or not.



"Spray away and get your nuts loose!

Independent testing of penetrating oils using a single steel bar with 1/2”x20 nuts torqued to 50 ft/lbs and treated with a 10% salt water solution that was allowed to rust. Listed are the chemicals and required removal torque.

-None ………………… 516 pounds

-WD-40 ……………… 238 pounds

-PB Blaster …………. 214 pounds

-Liquid Wrench ….. 127 pounds

-Kano Kroil ………… 106 pounds

-ATF-Acetone mix….53 pounds "