Originally Posted by John_Kunkel

A large pipe wrench works to hold the yoke.
iagree that is what I use.
MoparX which third member are you working on?
If it is a "489" case then you need to know how much rotational torque it has both ways now before you loosen the nut up so you can tighten it back up enough to have 1 to 5 inch lbs. MORE rotational torque when your done scope wrench up

Last edited by Cab_Burge; 03/14/24 12:27 PM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)