Originally Posted by Cab_Burge
550 to 575 at or around 5800 RPM.
Did you degree the cam? If so where is the intake lobe center installed in relation to TDC?
I'm thinking it may make more torque than HP with that compression ratio, maybe not.
All the pump gas motors I've built and dyno that had less than 10.5 to 1 comp. ratio made more torque than HP, above 10.5 to 1 made more HP than torque shruggy
Let us know what yours does please luck


Here is the cam card and the info I have. Hope it helps and I will report back when I know more.

IMG_5768.JPG