Like was already said.
Red Locktight.
Finger tighten all bolts to be sure they are aligned.
Tighten tight without torque wrench. I always felt given the size of the bolts inch lbs was too little.

and

NEVER use washers on TQ.

You would be surprised how often I have found this. Usually shows up as loose bolts that create lots of noise and often a front pump chewed up from the TQ moving around.

Also I am sure you know but TQ bolts are not regular bolts. They have short heads to clear the tranny/engine.

No need to do the stepped torque but it won't hurt. I always check the bolts 2 times anyway. Don't as why i started doing that. LOL