Did any magnum engines come with windage trays? If not, why?

Print Thread

Re: Did any magnum engines come with windage trays? If not, why? [Re: Michael Ecks] #2954714 08/17/21 02:56 PM 08/17/21 02:56 PM
Joined: Jan 2003 Posts: 25,836 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,836 Rio Linda, CA	Bill (Grumpy) Jenkins probably did more oil control research than anybody in his time; his conclusion was that a traditional windage tray might keep the sump oil off the spinning crank but it also provides a nearby surface for the oil slung off the rods to ricochet back up into the spinning assembly. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
Did any magnum engines come with windage trays? If not, why?	Michael Ecks	08/17/21 02:38 AM
Re: Did any magnum engines come with windage trays? If not, why?	Sniper	08/17/21 01:04 PM
Re: Did any magnum engines come with windage trays? If not, why?	Guitar Jones	08/17/21 01:51 PM
Re: Did any magnum engines come with windage trays? If not, why?	NachoRT74	08/17/21 03:49 PM
Re: Did any magnum engines come with windage trays? If not, why?	larrymopar360	08/17/21 04:17 PM
Re: Did any magnum engines come with windage trays? If not, why?	Michael Ecks	08/17/21 07:14 PM
Re: Did any magnum engines come with windage trays? If not, why?	Michael Ecks	08/17/21 07:18 PM
Re: Did any magnum engines come with windage trays? If not, why?	Guitar Jones	08/17/21 11:13 PM
Re: Did any magnum engines come with windage trays? If not, why?	Dcuda69	08/18/21 12:36 AM
Re: Did any magnum engines come with windage trays? If not, why?	cudaman1969	08/18/21 04:18 AM
Re: Did any magnum engines come with windage trays? If not, why?	360view	08/18/21 09:56 AM
Re: Did any magnum engines come with windage trays? If not, why?	slantzilla	08/18/21 12:12 PM
Re: Did any magnum engines come with windage trays? If not, why?	Moparite	08/19/21 10:41 AM
Re: Did any magnum engines come with windage trays? If not, why?	poorboy	08/20/21 01:26 AM
Re: Did any magnum engines come with windage trays? If not, why?	360view	08/20/21 09:41 AM
Re: Did any magnum engines come with windage trays? If not, why?	Moparite	08/20/21 10:10 AM
Re: Did any magnum engines come with windage trays? If not, why?	Gavin	09/15/21 02:16 PM
Re: Did any magnum engines come with windage trays? If not, why?	Rhinodart	09/16/21 03:08 AM
Re: Did any magnum engines come with windage trays? If not, why?	scratchnfotraction	09/20/21 01:00 PM
Re: Did any magnum engines come with windage trays? If not, why?	360view	09/21/21 10:29 AM
Re: Did any magnum engines come with windage trays? If not, why?	JohnRR	08/17/21 05:06 PM
Re: Did any magnum engines come with windage trays? If not, why?	John_Kunkel	08/17/21 06:56 PM
Re: Did any magnum engines come with windage trays? If not, why?	HotRodDave	09/21/21 04:20 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To