Originally Posted by Cab_Burge
The centered floating spacers in all the early posi in both 8 3/4 and Dana 60 were used to help set the endplay up on the Timken tapered roller axle bearings scope
You don't need to worry about setting the end play correctly with ball bearings on the axles like the Green bearings are as long as it has some end play your good in my book up,
Been there done that up wrench


Thanks, never really thought about what that was there for but it makes perfect sense.

Now can I get it out without pulling the center section? I'm guessing not...

And if I do have to pull it I think I'm going to re-gear it, 4:30's are fun but I'm thinking 3:55 or 3:73...

Doug

1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker
Best to Date: 11.67 @ 114.9 1.64 60ft

"Kids in cars cause accidents. Accidents in cars cause kids..."