Originally Posted by Cab_Burge
Originally Posted by TJP
Originally Posted by NITROUSN
I am not 100 percent sure but I believe there is a difference at the cranks rear flange.


You are correct sir. The mating of the engine and trans prior to 1962 is completely different than 62 and later. Also different is the trans, cables/ control, driveshaft flange emergency brake etc. They did almost a 100% redesign of all mechanicals in 62. beer
iagree On both, been there done that more than once, use the later 727 and buy and use decent a floor shifter scope twocents


And a driveshaft and a different E brake setup. The list goes on.