Started to pull the head for the oil leak. Head will be off in the morning.Observing things as I take it apart. MP iron block and heads. Questions I have.
1- On the rocker shaft stands how many dowels. Mine just has them on the two inboard stands. Outer and center did not have any.
2-Intake gasket is .060 thick. I assume Felpro. What is the best gasket? Dry or should I coat it around the ports with something?
3-Upper head studs into intake passage. What is best to seal them with?
4-Do the head bolts go into the coolant or are they blind holes. FSM makes no reference.