Timing cover for a roller cam

Print Thread

Re: Timing cover for a roller cam [Re: carrman] #2920279 05/09/21 08:19 AM 05/09/21 08:19 AM
Joined: Aug 2009 Posts: 1,317 Ohio J jlatessa pro stock
jlatessa pro stock J Joined: Aug 2009 Posts: 1,317 Ohio	Here's what we did on our 512 roller. 1/8 " round steel reinforcement welded to stock cover. Inexpensive and effective, used a roller button inside. Slight interference fit to back of AL. pump housing, works great to eliminate flex. Joe PS, If needed, you can sand a few thousands from the back of the pump housing to get exactly the interference you desire. Last edited by jlatessa; 05/09/21 08:48 AM.

Entire Thread
Subject	Posted By	Posted
Timing cover for a roller cam	carrman	05/09/21 01:02 AM
Re: Timing cover for a roller cam	A727Tflite	05/09/21 01:44 AM
Re: Timing cover for a roller cam	lancer493	05/09/21 02:04 AM
Re: Timing cover for a roller cam	carrman	05/09/21 02:10 AM
Re: Timing cover for a roller cam	Cab_Burge	05/09/21 02:36 AM
Re: Timing cover for a roller cam	carrman	05/09/21 02:56 AM
Re: Timing cover for a roller cam	'72CudaRacer	05/09/21 03:50 AM
Re: Timing cover for a roller cam	AndyF	05/09/21 03:14 PM
Re: Timing cover for a roller cam	jlatessa	05/09/21 12:19 PM
Re: Timing cover for a roller cam	Stanton	05/09/21 01:15 PM
Re: Timing cover for a roller cam	Stanton	05/09/21 01:21 PM
Re: Timing cover for a roller cam	Uberpube	05/09/21 05:24 PM
Re: Timing cover for a roller cam	AndyF	05/09/21 03:20 PM
Re: Timing cover for a roller cam	Stanton	05/09/21 04:21 PM
Re: Timing cover for a roller cam	Thumperdart	05/09/21 04:34 PM
Re: Timing cover for a roller cam	Stanton	05/09/21 05:17 PM
Re: Timing cover for a roller cam	carrman	05/09/21 06:14 PM
Re: Timing cover for a roller cam	birdtracker	05/09/21 06:14 PM
Re: Timing cover for a roller cam	Stanton	05/09/21 06:44 PM
Re: Timing cover for a roller cam	carrman	05/09/21 07:16 PM
Re: Timing cover for a roller cam	sasquatch	05/09/21 08:07 PM
Re: Timing cover for a roller cam	carrman	05/09/21 08:12 PM
Re: Timing cover for a roller cam	carrman	05/09/21 08:44 PM
Re: Timing cover for a roller cam	sasquatch	05/09/21 09:24 PM
Re: Timing cover for a roller cam	carrman	05/09/21 09:39 PM
Re: Timing cover for a roller cam	markz528	05/12/21 01:03 AM
Re: Timing cover for a roller cam	carrman	05/15/21 03:54 PM
Re: Timing cover for a roller cam	sasquatch	05/15/21 06:15 PM
Re: Timing cover for a roller cam	Stanton	05/10/21 12:47 AM
Re: Timing cover for a roller cam	carrman	05/10/21 12:48 AM
Re: Timing cover for a roller cam	sasquatch	05/10/21 03:39 AM
Re: Timing cover for a roller cam	Stanton	05/10/21 12:50 PM
Re: Timing cover for a roller cam	cudaman1969	05/11/21 09:01 PM
Re: Timing cover for a roller cam	Thumperdart	05/10/21 03:10 PM
Re: Timing cover for a roller cam	RobR	05/11/21 05:52 PM
Re: Timing cover for a roller cam	an8sec70cuda	05/11/21 07:00 PM
Re: Timing cover for a roller cam	Stanton	05/11/21 07:25 PM
Re: Timing cover for a roller cam	an8sec70cuda	05/11/21 07:40 PM
Re: Timing cover for a roller cam	B1MAXX	05/11/21 09:54 PM
Re: Timing cover for a roller cam	LaRoy Engines	05/09/21 11:10 PM
Re: Timing cover for a roller cam	451Mopar	05/10/21 12:35 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To