340 crank into 360 block bearing spacers

Print Thread

Re: 340 crank into 360 block bearing spacers [Re: MR_P_BODY] #2919991 05/08/21 01:32 PM 05/08/21 01:32 PM
Joined: Jan 2003 Posts: 14,515 So. Burlington, Vt. F fast68plymouth I Live Here
fast68plymouth I Live Here F Joined: Jan 2003 Posts: 14,515 So. Burlington, Vt.	I don’t believe the seal surface diameter is the same between a 318/340 crank and a 360 crank(I believe the 360 is larger)....... but a quick measurement would clear that up. 68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads

Entire Thread
Subject	Posted By	Posted
340 crank into 360 block bearing spacers	LSP	05/07/21 05:17 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/07/21 05:23 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/07/21 05:36 PM
Re: 340 crank into 360 block bearing spacers	moparx	05/08/21 04:38 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 04:56 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/08/21 05:07 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:18 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 05:32 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:44 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:01 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:04 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:15 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:23 PM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/09/21 02:20 AM
Re: 340 crank into 360 block bearing spacers	cudaman1969	05/09/21 02:52 AM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/08/21 02:35 AM
Re: 340 crank into 360 block bearing spacers	CMcAllister	05/09/21 04:29 AM

Hop To