340 crank into 360 block bearing spacers

Print Thread

Re: 340 crank into 360 block bearing spacers [Re: Bad340fish] #2919990 05/08/21 01:18 PM 05/08/21 01:18 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Originally Posted by Bad340fish I think the rear main seal is what is in question. I would have thought that a stock 360 seal would still fit the block

Entire Thread
Subject	Posted By	Posted
340 crank into 360 block bearing spacers	LSP	05/07/21 05:17 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/07/21 05:23 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/07/21 05:36 PM
Re: 340 crank into 360 block bearing spacers	moparx	05/08/21 04:38 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 04:56 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/08/21 05:07 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:18 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 05:32 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:44 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:01 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:04 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:15 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:23 PM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/09/21 02:20 AM
Re: 340 crank into 360 block bearing spacers	cudaman1969	05/09/21 02:52 AM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/08/21 02:35 AM
Re: 340 crank into 360 block bearing spacers	CMcAllister	05/09/21 04:29 AM

Hop To