340 crank into 360 block bearing spacers

Print Thread

Re: 340 crank into 360 block bearing spacers [Re: fast68plymouth] #2919997 05/08/21 01:44 PM 05/08/21 01:44 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	The 360 seal is larger and it fits into the block(2 pieces, top and bottom) and the bearings fit the block

Entire Thread
Subject	Posted By	Posted
340 crank into 360 block bearing spacers	LSP	05/07/21 05:17 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/07/21 05:23 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/07/21 05:36 PM
Re: 340 crank into 360 block bearing spacers	moparx	05/08/21 04:38 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 04:56 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/08/21 05:07 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:18 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 05:32 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:44 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:01 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:04 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:15 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:23 PM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/09/21 02:20 AM
Re: 340 crank into 360 block bearing spacers	cudaman1969	05/09/21 02:52 AM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/08/21 02:35 AM
Re: 340 crank into 360 block bearing spacers	CMcAllister	05/09/21 04:29 AM

Hop To