340 crank into 360 block bearing spacers

Print Thread

Re: 340 crank into 360 block bearing spacers [Re: Bad340fish] #2919968 05/08/21 12:38 PM 05/08/21 12:38 PM
Joined: Sep 2003 Posts: 19,480 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,480 north of coder	Originally Posted by Bad340fish Originally Posted by LSP Anyone make bearing spacers to put a 340 crank into a 360 block? Thanks I want to say Mancini used to sell something like that. But like Mr. Porter I also wonder about the rear seal situation. if bearing spacers were to be used, wouldn't the 360 pan still be used with the 360 rear main cap ? or am i missing something ?

Entire Thread
Subject	Posted By	Posted
340 crank into 360 block bearing spacers	LSP	05/07/21 05:17 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/07/21 05:23 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/07/21 05:36 PM
Re: 340 crank into 360 block bearing spacers	moparx	05/08/21 04:38 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 04:56 PM
Re: 340 crank into 360 block bearing spacers	Bad340fish	05/08/21 05:07 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:18 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 05:32 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 05:44 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:01 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:04 PM
Re: 340 crank into 360 block bearing spacers	fast68plymouth	05/08/21 06:15 PM
Re: 340 crank into 360 block bearing spacers	MR_P_BODY	05/08/21 06:23 PM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/09/21 02:20 AM
Re: 340 crank into 360 block bearing spacers	cudaman1969	05/09/21 02:52 AM
Re: 340 crank into 360 block bearing spacers	Cab_Burge	05/08/21 02:35 AM
Re: 340 crank into 360 block bearing spacers	CMcAllister	05/09/21 04:29 AM

Hop To