Cutting cast iron

Print Thread

Re: Cutting cast iron [Re: cudaman1969] #2823190 09/21/20 09:52 AM 09/21/20 09:52 AM
Joined: Jan 2003 Posts: 10,752 North Dakota 6PakBee I Live Here
6PakBee I Live Here Joined: Jan 2003 Posts: 10,752 North Dakota	Boy, that sounds like a block I ran into at one time. Crack in bore, attempted repair with a MIG, other damage. Here are some photos I took before the seller got the block back. "We live in a time when intelligent people are being silenced so that stupid people won't be offended".

Entire Thread
Subject	Posted By	Posted
Cutting cast iron	cudaman1969	09/19/20 07:53 PM
Re: Cutting cast iron	6PakBee	09/19/20 08:32 PM
Re: Cutting cast iron	cudaman1969	09/19/20 09:10 PM
Re: Cutting cast iron	elmor353	09/19/20 09:11 PM
Re: Cutting cast iron	TJP	09/19/20 11:19 PM
Re: Cutting cast iron	67vertman	09/19/20 11:59 PM
Re: Cutting cast iron	cudaman1969	09/20/20 12:48 AM
Re: Cutting cast iron	6PakBee	09/20/20 01:00 AM
Re: Cutting cast iron	justinp61	09/20/20 01:29 AM
Re: Cutting cast iron	cudaman1969	09/20/20 02:37 AM
Re: Cutting cast iron	Cab_Burge	09/20/20 03:03 AM
Re: Cutting cast iron	cudaman1969	09/20/20 02:44 PM
Re: Cutting cast iron	mr_340	09/20/20 07:15 PM
Re: Cutting cast iron	GODSCOUNTRY340	09/20/20 09:08 PM
Re: Cutting cast iron	Cab_Burge	09/21/20 12:25 AM
Re: Cutting cast iron	poorboy	09/21/20 01:28 AM
Re: Cutting cast iron	cudaman1969	09/21/20 07:08 AM
Re: Cutting cast iron	6PakBee	09/21/20 01:52 PM
Re: Cutting cast iron	mr_340	09/21/20 09:51 PM
Re: Cutting cast iron	375inStroke	09/21/20 11:30 PM
Re: Cutting cast iron	cudaman1969	09/22/20 03:48 AM
Re: Cutting cast iron	cudaman1969	09/22/20 03:58 AM
Re: Cutting cast iron	cudaman1969	09/22/20 04:01 AM
Re: Cutting cast iron	6PakBee	09/22/20 01:33 PM
Re: Cutting cast iron	cudaman1969	09/22/20 03:50 PM
Re: Cutting cast iron	6PakBee	09/22/20 05:55 PM
Re: Cutting cast iron	cudaman1969	09/22/20 09:04 PM
Re: Cutting cast iron	6PakBee	09/22/20 10:10 PM
Re: Cutting cast iron	cudaman1969	09/23/20 12:31 AM
Re: Cutting cast iron	IMGTX	09/30/20 04:53 PM
Re: Cutting cast iron	cudaman1969	10/01/20 07:54 PM
Re: Cutting cast iron	farmboy	10/03/20 02:49 AM
Re: Cutting cast iron	6PakBee	10/03/20 01:11 PM
Re: Cutting cast iron	farmboy	10/03/20 04:05 PM
Re: Cutting cast iron	cudaman1969	10/03/20 04:08 PM
Re: Cutting cast iron	roadrunninMark	10/03/20 06:01 PM
Re: Cutting cast iron	6PakBee	10/03/20 06:54 PM
Re: Cutting cast iron	GomangoCuda	09/20/20 12:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To