These 302s are fresh from the machine shop, 16 new valves, shaved about 0.008 to square them up, I forget how many new guides.
Didn't say anything about whether they did a 3 angle VJ or not. I can pull them back down and do some mild porting, basically clean up the casting fuzz, if they didn't. I have always been leery of 360 heads on a 318 as most 360 Chambers are bigger than 318 Chambers to begin with, meaning even lower compression which seems counter productive. The 302 heads are supposed to be smaller chamber than the original heads (which are 163 castings if I remember right)