833 Questions

Print Thread

Re: 833 Questions [Re: fourgearsavoy] #2779501 05/29/20 03:16 PM 05/29/20 03:16 PM
Joined: Aug 2004 Posts: 3,547 stratford,ontario,canada JD340 OP master
JD340 OP master Joined: Aug 2004 Posts: 3,547 stratford,ontario,canada	Originally Posted by fourgearsavoy Originally Posted by JD340 Originally Posted by Grizzly The shifter will work as long as it has the same hair pin setup as factory. Putting an OD in is a little more involved with modifying the rods and transmission levers. If you know how to weld it's easy, it's a bit of a pain though. Are you putting an OD in a B body or putting the shifter in a truck with OD? Hoping to use the shifter in my truck. My factory shifter is worn and sloppy, I figured an upgrade to the comp plus would tighten things up considerably. PLUS, it comes with the pistol grip shifter I've been wanting to add as well! It will work but you may need to make the 3-4 rod longer Gus Are you talking adjustment wise, or actually making the rod longer? Could I use the original 3-4 rod instead? Nothing to see here. Carry on.

Hop To