I have a set of spray bar V.C. that came with a set of Indy 440-1 heads that I bought that has Jesel paired shaft rocker arms on them, I tried to use my numbered drill bit set to see how big the holes are in them, a #60 bit was to big
![work work](/ubbthreads/images/graemlins/custom/work.gif)
Those lines are fed by a # 3 AN hose which is 3/16 I.D. I think
My wall chart shows a #60 bit to be .040 so the holes are smaller than that
![shruggy shruggy](/ubbthreads/images/graemlins/custom/shruggy.gif)
I have another set of smaller numbered drill bits(61 to 80) in my race trailer but it is 45 miles away now with a customer car in it at a paint and body shop, I'm hoping I'll have it back by Friday to go race my car this weekend
![luck luck](/ubbthreads/images/graemlins/custom/luck.gif)
If you don't find out what size to use by then I will be glad to find out what size the holes are in mine
![up up](/ubbthreads/images/graemlins/custom/thumbs_up.gif)