Air pressure in bias ply M/T slicks

Print Thread

Re: Air pressure in bias ply M/T slicks [Re: CMcAllister] #2549632 09/13/18 02:58 PM 09/13/18 02:58 PM
Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina sgcuda master
sgcuda master Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina	Originally Posted By CMcAllister Start letting air out and watch the 60' numbers. Also try tightening the shocks and watch the time slip. Car is quick enough to benefit from a good DA shock. Work in 1/2 pound increments. You should be pretty close.

Entire Thread
Subject	Posted By	Posted
Air pressure in bias ply M/T slicks	caper	09/13/18 06:34 PM
Re: Air pressure in bias ply M/T slicks	CMcAllister	09/13/18 06:45 PM
Re: Air pressure in bias ply M/T slicks	sgcuda	09/13/18 06:58 PM
Re: Air pressure in bias ply M/T slicks	caper	09/13/18 06:55 PM
Re: Air pressure in bias ply M/T slicks	Cab_Burge	09/13/18 07:33 PM
Re: Air pressure in bias ply M/T slicks	sam64	09/13/18 07:46 PM
Re: Air pressure in bias ply M/T slicks	@#$%&*!	09/15/18 03:56 AM
Re: Air pressure in bias ply M/T slicks	madscientist	09/13/18 07:03 PM
Re: Air pressure in bias ply M/T slicks	RustyM	09/13/18 07:15 PM
Re: Air pressure in bias ply M/T slicks	DusterKid	09/13/18 07:30 PM
Re: Air pressure in bias ply M/T slicks	cb1289	09/13/18 07:54 PM
Re: Air pressure in bias ply M/T slicks	caper	09/13/18 09:19 PM
Re: Air pressure in bias ply M/T slicks	MR_P_BODY	09/13/18 09:45 PM
Re: Air pressure in bias ply M/T slicks	dvw	09/13/18 10:12 PM
Re: Air pressure in bias ply M/T slicks	'72CudaRacer	09/14/18 04:22 AM
Re: Air pressure in bias ply M/T slicks	caper	09/14/18 04:39 AM
Re: Air pressure in bias ply M/T slicks	dvw	09/14/18 11:16 AM

Hop To