Air pressure in bias ply M/T slicks

Print Thread

Re: Air pressure in bias ply M/T slicks [Re: caper] #2549626 09/13/18 02:45 PM 09/13/18 02:45 PM
Joined: Dec 2005 Posts: 11,769 Fulton County, PA C CMcAllister Mr. Helpful
CMcAllister Mr. Helpful C Joined: Dec 2005 Posts: 11,769 Fulton County, PA	Start letting air out and watch the 60' numbers. Also try tightening the shocks and watch the time slip. Car is quick enough to benefit from a good DA shock. If the results don't match the theory, change the theory.

Entire Thread
Subject	Posted By	Posted
Air pressure in bias ply M/T slicks	caper	09/13/18 06:34 PM
Re: Air pressure in bias ply M/T slicks	CMcAllister	09/13/18 06:45 PM
Re: Air pressure in bias ply M/T slicks	sgcuda	09/13/18 06:58 PM
Re: Air pressure in bias ply M/T slicks	caper	09/13/18 06:55 PM
Re: Air pressure in bias ply M/T slicks	Cab_Burge	09/13/18 07:33 PM
Re: Air pressure in bias ply M/T slicks	sam64	09/13/18 07:46 PM
Re: Air pressure in bias ply M/T slicks	@#$%&*!	09/15/18 03:56 AM
Re: Air pressure in bias ply M/T slicks	madscientist	09/13/18 07:03 PM
Re: Air pressure in bias ply M/T slicks	RustyM	09/13/18 07:15 PM
Re: Air pressure in bias ply M/T slicks	DusterKid	09/13/18 07:30 PM
Re: Air pressure in bias ply M/T slicks	cb1289	09/13/18 07:54 PM
Re: Air pressure in bias ply M/T slicks	caper	09/13/18 09:19 PM
Re: Air pressure in bias ply M/T slicks	MR_P_BODY	09/13/18 09:45 PM
Re: Air pressure in bias ply M/T slicks	dvw	09/13/18 10:12 PM
Re: Air pressure in bias ply M/T slicks	'72CudaRacer	09/14/18 04:22 AM
Re: Air pressure in bias ply M/T slicks	caper	09/14/18 04:39 AM
Re: Air pressure in bias ply M/T slicks	dvw	09/14/18 11:16 AM

Hop To