For anyone who thinks that TIG wedling steel is difficult

Print Thread

Re: For anyone who thinks that TIG wedling steel is difficult [Re: Uberpube] #2542124 08/27/18 06:57 PM 08/27/18 06:57 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	I've never had any issue using the red electrodes and been doing alum for years now.. but I also try to keep the cost down

Entire Thread
Subject	Posted By	Posted
For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/26/18 11:53 PM
Re: For anyone who thinks that TIG wedling steel is difficult	madscientist	08/27/18 12:01 AM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/27/18 12:18 AM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/27/18 12:20 AM
Re: For anyone who thinks that TIG wedling steel is difficult	Uberpube	08/27/18 10:49 PM
Re: For anyone who thinks that TIG wedling steel is difficult	MR_P_BODY	08/27/18 10:57 PM
Re: For anyone who thinks that TIG wedling steel is difficult	justinp61	08/27/18 01:30 AM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/27/18 01:41 AM
Re: For anyone who thinks that TIG wedling steel is difficult	pittsburghracer	08/27/18 02:33 AM
Re: For anyone who thinks that TIG wedling steel is difficult	humpty	08/27/18 02:34 AM
Re: For anyone who thinks that TIG wedling steel is difficult	CMcAllister	08/27/18 02:39 AM
Re: For anyone who thinks that TIG wedling steel is difficult	Dduster	08/27/18 03:14 AM
Re: For anyone who thinks that TIG wedling steel is difficult	jcc	08/27/18 04:02 AM
Re: For anyone who thinks that TIG wedling steel is difficult	madscientist	08/27/18 04:26 AM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/27/18 03:36 AM
Re: For anyone who thinks that TIG wedling steel is difficult	Stanton	08/27/18 04:15 AM
Re: For anyone who thinks that TIG wedling steel is difficult	EchoSixMike	08/27/18 11:50 AM
Re: For anyone who thinks that TIG wedling steel is difficult	FastmOp	08/27/18 12:19 PM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/27/18 12:58 PM
Re: For anyone who thinks that TIG wedling steel is difficult	MR_P_BODY	08/27/18 01:47 PM
Re: For anyone who thinks that TIG wedling steel is difficult	madscientist	08/27/18 02:31 PM
Re: For anyone who thinks that TIG wedling steel is difficult	MR_P_BODY	08/27/18 02:45 PM
Re: For anyone who thinks that TIG wedling steel is difficult	Stanton	08/27/18 03:24 PM
Re: For anyone who thinks that TIG wedling steel is difficult	Leigh	08/27/18 03:40 PM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/28/18 01:32 AM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	08/28/18 01:35 AM
Re: For anyone who thinks that TIG wedling steel is difficult	pittsburghracer	08/28/18 01:45 AM
Re: For anyone who thinks that TIG wedling steel is difficult	Leigh	08/28/18 02:35 AM
Re: For anyone who thinks that TIG wedling steel is difficult	Leigh	08/28/18 02:38 AM
Re: For anyone who thinks that TIG wedling steel is difficult	markz528	08/28/18 02:47 AM
Re: For anyone who thinks that TIG wedling steel is difficult	Uberpube	08/28/18 03:07 AM
Re: For anyone who thinks that TIG wedling steel is difficult	jcc	08/28/18 10:29 PM
Re: For anyone who thinks that TIG wedling steel is difficult	justinp61	08/28/18 04:14 AM
Re: For anyone who thinks that TIG wedling steel is difficult	D-50	08/28/18 05:03 AM
Re: For anyone who thinks that TIG wedling steel is difficult	451Mopar	09/05/18 04:23 AM
Re: For anyone who thinks that TIG wedling steel is difficult	OUTLAWD	08/28/18 03:37 PM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	09/05/18 12:54 AM
Re: For anyone who thinks that TIG wedling steel is difficult	moparlulu	09/05/18 09:32 AM
Re: For anyone who thinks that TIG wedling steel is difficult	jcc	09/05/18 07:46 PM
Re: For anyone who thinks that TIG wedling steel is difficult	sgcuda	09/06/18 04:49 AM
Re: For anyone who thinks that TIG wedling steel is difficult	MR_P_BODY	09/06/18 05:09 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To