Originally Posted By dvw
Originally Posted By crankn101
Originally Posted By dvw
Originally Posted By crankn101
[quote=Clanton][quote=BradH]What's the budget for this effort?
12 to 15,000$ I would think



I dont really have a budget, I was hoping for 10-12K for the engine or so plus whatever power adder I go with.

For the record, building a 572 or an after market block was never in any of my plans.


I'd run a Late Hemi with a turbo. Stock block and forged crank will hold 1000 HP w/o issue. Stock heads are very good. aftermarket piston/rod for boost. Use a knock off Drag Pac intake. 20 psi should get it easy.
Doug


https://www.google.com/amp/s/www.hotrod....rbocharger/amp/

This is friends Dart. Since the article he has had to make quite a few upgrades as he bent the Dana 60 and the bars holding it in the car! As I recall he's been 8.20's.

It's a very mild setup and he drives it all over Wichita.

I have another local friend that parts SRT-8 cars with the 6.1 and an early A-body 'Cuda with this engine and a turbo will be my next project.


'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.