.
Is the 8915PT the head gasket of choice for a 10.5:1 engine?
Also, I don't see any valley pan gaskets with the heat crossover blocked. Does anyone still make them? Thanks!
Fel Pro still sells the valley pan with no heat crossover passage in them,Fel Pro part # 1215
As far as head gasket part #s you probably mean the 8519PT which is the common Fel Pro replacement Perma torque part #, the 1009 will also work on stock bore 440 motors up to .040 over size well, after that it depends on the heads and blocks used if the 1009 will protrude into the combustion chamber. The 1009head gasket has a 4.410 bore size according to the Fel Pro specs on that head gasket, the 8519PT is a little bigger than that, maybe by .060 to .100
IHTHs