Originally Posted By Cab_Burge
On your deal reusing the old cam and lifters already broke in with new valve springs I would look for 140 to 170 lbs. on the seats and from 325 to 375 lbs. at max lift up scope
As far as the black coating did you use ARP assembly lube and black cam lube on the motor?
If so that may be where your black coating colors are coming from still shruggy
That stuff is a bear to get flushed out of the motor, especially if it is a street car that doesn't go on long trips over two hundred miles at a time work


I didn't do the initial build so I am not sure what was used. Thank you for the spring info.