Originally Posted By an8sec70cuda
I have KB aluminum stands on my 572" hemi that have been used since 2006 w/ no trouble at all. 276/284 solid roller, 220 psi seat, 600+ psi open pressure.
As heavy as everything is for a hemi, I'd use the aluminum stands as long as they're decent quality parts.

Me too! When i went to aluminum heads & rocker stands the weight saving was close to 90 lbs.With everything else I did the total loss was 200 lbs!

3.13.17 007.jpg7.18.17 019.jpg
Last edited by hemi-itis; 03/26/18 03:26 PM.
HEMI-ITIS has no cure.
My condition is fully BLOWN!!