I have a very slow moving project that it coming close...but it has been for a few years.

What I have done is take the TBI system from a 350 Chebby and modded the ECU/computer with a megasquirt MS2 processor board.

Stage 1 will be running HEI ignition - triggered from a lean burn distributor.

Stage 2 will be using LS2 coils mounted on the valve covers running in wasted spark - thus I need a crank mount trigger wheel to get crank position information into the modded ECU.

I really hope to be running stage 1 by the end of this summer.

Plaz