Everything I have done has made it a tiny bit better each time but it’s never been eliminated all together.
When I un-plug the vacuum advance it gets better.
Compression test revealed 155psi on cylinder 8 with engine warm and carb wide open cranking on it for about 5 seconds.
I’m going to remove the valve cover and do a leak down test on cylinder 8 and hopefully that reveals something cause this is driving me insane.
I reread back thru the old thread. with these changes/adjustments makeing it better it would not be the balancing. unplugging the can changes (4) things: reluctor gap/Rotor Phasing/timing/rotor tip to cap terminal air gap (related to RP) but the RP is corrected which gets the best rotor radial air gap & iirc you bumped the timing up to make up for what the can took out correct? there might be a ring issue causing the fouling but iirc you said it was fuel not oil? How the can capped is helping things & getting #8 to fire is on my mind.
