you can disable the rev limiter all together by setting your rotary switches to 00. also if you want to disable the multi spark & rev limiter, you set them to 01
I thought if you set the rev limiter to 0 the engine won’t start?
is this for your ignition box?
http://www.cranecams.com/uploads/instructions/9000-6000c.pdf00 disables rev limiter, 01 disables multispark AND rev limiter...
Yes I still have the instructions and I have went over the wiring multiple times.
Pick up coil wires are wired correctly, the purple crane wire goes to orange positive on distributor and green crane wire goes to black negative wire on pick up coil.
The yellow rev limiter wire is wired directly to battery positive.
The main power wire on crane box is 10 gauge wire going straight to battery positive and the negative main wire on crane box goes directly to negative battery terminal.
Coil wires are correct.
Thin red wire is going to it’s own switched 12v toggle switch to power the box on and off.
I have pick up coil wires routed as far away from the other wires as I can.
Rev limiter is set at 6k rpm on both dials.
