Originally Posted By 67Satty
I did this idea from the dodgecharger.com forum. Cheap and easy to make and seems to do the job:

http://www.dodgecharger.com/forum/index.php?topic=13216.0




All these jobber cheap motor mounts are junk , even before trying this modification

Two I got from O Reilly's Anchor 2250 the welded nuts where crooked and one fell off in the box , serious

Metal looks thin as paper

Two I got from Napa , bolt studs for mount need to bee shortened but the problem with there's was the welded nut and opposing holes looked fine but where a 1/2" further away from the mounts then factory so they didn't sit flush on the K Frame when running the bolts through , mounts sat at least 1/2" off the Frame

Who the hell sells a decent motor mount to begin with before doing this mod ? Something that least fits proper

432 Stroker Motor will bee done this week for my 71 Superbee

Last edited by bee1971; 10/31/17 10:21 AM.

1971 Dodge Charger Superbee
2011 Ram Sport 1500 Quad Cab Deep Water Blue Loaded
Siberian Huskies